LID-DPSSAE
Laser Investigator & Designer
Diode Pumped Solid State Active Elements

SRI RL, Bauman MSTU jointly with General Physics Institute of RAS

     Program Set LID-DPSSAE is the HandBook-Calculation Program Set for the professional calculations and training of specialists.
     This program set allows you to make calculations for distribution of the volumetric power of heat-release in the active element (at arbitrary correlation of the absorption bandwidth and the radiation spectral width), the distribution of temperature on the active element cross-section, the distributions of thermoelastic stresses on the active element cross-section, active element optical length increasing for the laser radiation, depolarisation of the laser radiation passed through the active element (conoscope picture), the values of the focal length and the positions of the equivalent lens main plane. The computations are carry out for rectangular and cylindrical form of an active elements. Also program set allows to execute the modeling of interferograms, analysis of an experemental measured interferograms and comparison analysis ones.

• Program "DPSSAE-R"
• Program "DPSSAE-C"
• Program "INTERF"
• Program "Experiment"

• CPU:from 486DX-100, best result - Pentium 2500 or higher,
• RAM: not less 600 KB,
• HD: not less 10 MB,
• Is recommended: 1MB EMM or EMS,
• Opearation System: MS DOS 3.0 or higher, DR DOS, Windows 3.x, Windows 95, Windows NT, OS/2, Free BSD, Mac OS.