Program "DPSSAE-R"

     Program Set "DPSSAE-R" allows you to carry out the computations of a pumping processes for active elements of a rectagular form.

As Initial Data You can input the following parameters:

• pumping direction and the quantity of the pumping sources,
• pumping power for all the pumping sources,
• reflection of the pumping surface of the active element,
• spectral width of pumping radiation,
• activator concentration,
• cross-section of the transition at the pumping wavelength,
• spectral width of the active element absorption,
• thermal conductivity,
• thermal expansion coefficient,
• Young's module,
• Poisson's ratio,
• thermo-optical parameters of active element,
• length, width and thickness of active element,
• types of the end-wall faces of active element,
• number of reflection inside the active element,
• angle between radiation incidence and the active element surface,
• regime of cooling.

	The subsection for Input of the Thermo-Optical Parameters.
The subsection for Input of the Pumping Parameters (energy and spectral).
All computations results can be presented as 2D- or 3D-graph distributions.
	3D-Distribution of the Temperature on the cross-section of the active element.
3D-Distribution of the stress component on the cross-section of the active element.
The distributions for depolarization and length increasing are calculated for direct and zig-zag propagation inside of the active element.
	3D-Distribution of the Depolarization for direct propagation.
3D-Distribution of the Depolarization for zig-zag propagation.
	3D-Distribution of the length increasing for zig-zag propagation.